HFA7 Master Hoop Frame Instructions

Step 1 – Hoop Your Stabilizer

Secure your cutaway stabilizer firmly in your embroidery hoop, making sure it is smooth and taut.

Optional but recommended: Calibrate your embroidery machine and hoop before stitching your Master Hoop Frame to ensure accurate alignment and placement.

Step 2 – Stitch Your Master Hoop Frame

Load the HFA7 embroidery design onto your embroidery machine and stitch the entire design.

Step 3 – Cut Out the Window

Using a rotary cutter and ruler, or sharp scissors, carefully cut out the center window opening, staying just inside the blue triple-bean stitching. Be careful not to cut through the stitching.

Your Master Hoop Frame Is Ready!

The reinforced triple-bean stitching and filled frame provide strength and durability, allowing your Master Hoop Frame to be reused for many cards before it needs to be restitched.

Thread Said – Say it in stitches.

Step 2 – Stitch Your Master Hoop Frame

Load the HFA7 embroidery design onto your embroidery machine and stitch the entire design.

Step 3 – Cut Out the Window

Using a rotary cutter and ruler, or sharp scissors, carefully cut out the center window opening, staying just inside the blue triple-bean stitching. Be careful not to cut through the stitching.